12 Pack of Pro-Seal 64605 Pro Weld Quick Cold Welding Compound 2oz

2- 1oz tubes. Resin and Hardener.
4 Minute Quick Set Steel Compound

Directions:
1. Surface must be clean, dry and free from grease, oil and dirt.
2. For best results, roughen surface to be Pro Welded with sandpaper or file. Note: some sandpapers leave an oily residue. Repeat Step #1.
3. Squeeze out equal amounts from each tube onto a disposable surface such as a piece of cardboard. Mix thoroughly together until a uniform gray color is achieved. Mix only what you can use immediately.
4. Apply Pro Weld Quick to surface to be repaired. The mixture will become hot while it sets.
5. Working time 3-5 minutes. Develops 80% bond strength in 1 hour with full cure after 24 hours. Final bond withstands temperatures up to 200 degrees Fahrenheit (93 degrees Celsius).
6. If temperature is below 40 degrees Fahrenheit (5 degrees Celsius), development times may be lengthened.
7. Clean up excess material before it dries with a towel or rag dampened with paint thinner.
8. When compound is fully cured, it can be drilled, filed, machined and tapped.