Schrader 29176 Aluminium Clamp-in Variable Angle 315MHz TPMS Sensor for Nissan

Part No.: 29176
Commercial Name: Schrader Aluminium Clamp-in Variable Angle 315MHz Sensor for Nissan Applications
OEM Sensor P/N: 40700-1PA0A
EZ-sensor® coverage: YES
EAN Code: 5054208025940
Nut Torque: 35.4 in-lbs (4 Nm) Nm
Screw Torque: 35.4 in-lbs (4 Nm) Nm
Valve Core Torque: 3.5 in-lbs (0.4 Nm) Nm

Relearn Summary: OBD Relearn
Relearn Description
After a tire rotation or tire replacement, the system will relearn itself under normal driving conditions. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
TIA troubleshooting tips:
- The vehicle may enter your service facility with the OBDII fuse blown. If your scan tool issues a communication error while writing sensor IDs, verify that this fuse is not blown.
- During some types of service, the TPMS sensors may shut off resulting in a MIL when you start up the vehicle after service. The MIL will turn off during normal driving conditions, or you can perform an ID relearn using a properly formatted scan tool to turn the MIL off in the service bay.
- If a multi-format sensor was installed on the vehicle, and the customer returns with a MIL, then use a properly formatted scan tool to read the vehicle DTCs. If any or all of the following codes are issued, replace the multi-format sensor with an OE 1:1 equivalent.
DTC Codes: C1720, C1721, C1722, C1723, C1724